Maple Bacon Fudge Recipe (2024)

FAQs

What is maple fudge made of? ›

Bring maple syrup, heavy cream, and brown sugar to a boil in a saucepan over medium heat. Continue to boil, without stirring, until mixture starts to bubble and registers 240 degrees F (166 degrees C) on a candy thermometer. Remove from heat. Add butter and salt but do not mix.

Proper fudge will set after sitting at room temperature for about 4 hours. Understand that cooking the fudge properly is the skirmish before the war. The real test of your mettle will occur when you beat the fudge, and learn to master the fine art of turning and pouring. And if it doesn't work out it's okay!

Can you freeze fudge with sweetened condensed milk? Yes! This is a very common ingredient in homemade fudge and it freezes well.

Store uneaten fudge in an airtight container at room temperature for up to 1 week, or in the refrigerator for up to 2 weeks.

Grainy Fudge

The sugars probably crystallized, a common mistake when making candy like fudge or caramel. If the melting sugar splashes onto the sides of the pan, it turns back into crystals and causes the fudge to seize up. To avoid this issue, swirl the pan instead of stirring it with a spoon.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Use Evaporated Milk- Make sure to use evaporated milk and not sweetened condensed milk. If you accidentally use sweetened condensed milk your fudge will be incredibly over the top sweet. Cut up the Butter– Before adding the butter in make sure to cut it into smaller pieces for faster melting.

After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.

If fudge experiences a change in temperature, it can melt or develop a slimy texture on the surface. If it is exposed to air, it can dry out and become hard. Specific add-ins to fudge have the potential to grow mold or give off a bad odor, and at that point, the fudge should be avoided.

Why won t my condensed milk fudge set? ›

The most common culprit behind unset fudge is inaccurate temperature control. If the sugar mixture hasn't reached the correct temperature, your fudge won't set. Ensure you use a reliable candy thermometer and follow temperature guidelines meticulously to achieve the desired consistency.

Freezing Fudge

Wrap your fudge in an air-tight container. Several layers of saran wrap, vacuum seal, Tupperware should all keep the moisture locked in pretty good. A couple hours before you would like to enjoy your fudge, take it out of the freezer and allow it to thaw out on your counter. ENJOY!

Ensure you have kept the leftover fudge in a sealable container in a cool, dark, dry place, such as kitchen drawers, cupboards, or a pantry. Fudge stored exposed at room temperature will last for a month or two but will start to show signs of hardening around the edges and a loss of its freshness.

While you ultimately want crystals to form, it's important that they don't form too early. The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

Fudge is a dense, rich confection typically made with sugar, milk or cream, butter and chocolate or other flavorings. The base for fudge is boiled until it reaches the soft-ball stage (135 to 140 degrees F), then stirred or beaten as it cools to minimize the formation of sugar crystals.

Maple leaf candy is an authentic sweet with just two ingredients: maple syrup and butter. It doesn't get much simpler—or sweeter—than that. Maple syrup is boiled, mixed with just a bit of butter, and then molded into beautiful leaf-shaped candies.

Ingredients: Glucose (maize derived), sucrose, water, sorbitol (420), food acid (330), preservative (202), burnt sugar and natural flavour substances. Any flavouring substance or preparation is this product is listed as GRAS by FDA and/or FEMA.

What distinguishes penuche is the use of brown sugar rather than white. In recent years, it has become common in New England to add maple syrup to the recipe for penuche fudge. Some confectioners will call this "maple syrup penuche fudge", and others do not make any distinction at all.